Details:

Anchor agitator structure is simple, suitable for viscosity under 100 pa s. fluid mixing, when the fluid viscosity in 10 ~ 100 pa s., can be in the middle of the anchor paddle to add a horizontal blade, is the box stirrer, to increase the mixture in the container.

Features:

This type of mixer is a slow-speed agitator, which is often used in the process of medium and high viscosity liquid mixing and heat transfer reaction.

1. Large shear force can be obtained along the wall surface during low speed rotation of MKS, which can prevent settlement and wall adhesion, and the bottom shape is attached to the bottom bearing of the elliptical tank and the middle.

2. An anchor belt type (MDS) is a combination of spiral ribbon and frame type, which combines the function of the screw belt type and frame type agitator.

3. Box-type (FKS), FSS (FSS), easy to make shape, effective with frame type, medium viscosity mixing and dissolution are more suitable.

4. The plate and frame type (BKS) is a very wide scope of application of viscosity high mixing impeller, the impeller structure is simple, the impeller on the drum to the profile of the projection area of the profile area of a large proportion of tank. It has a high mixing efficiency, and has a large shear force, which is suitable for liquid suspension, dispersion of liquid liquid, and air and liquid mass transfer and heat transfer operation which can be inhaled from the liquid surface.

Application:

Blade tip shape and agitation tank wall should agree, in which only a small gap, can remove attached to the tank wall viscous reaction product or solid accumulation on the bottom of the channel, keep good heat transfer effect. The circumferential speed of the outer edge of the blade is 0.5 ~ 1.5m/s, which can be used to agitate the Newtonian fluid and the pseudoplastic fluid of up to 200Pa · s (see viscous fluid flow). There is a large stagnation area in the liquid layer when the liquid is stirred.